Integrin is a protein in cells that manage cell adhesion. They are crucial to the biochemical functions of cells. L 2 is one type of integrin. Its I domain is responsible for ligand binding. Scientists understand how Alpha L I domain binds Mg2+ at a pH of 7 but not in acidic environments. Knowing the specificity of integrin at a lower pH is important because when tissues become inflamed, they release acidic compounds. We have cloned, expressed, and purified L I-domain and using NMR analysis, we determined that wild type Alpha L I domain does not bind to Mg2+ at a pH of 5.

Transient Receptor Potential Melastatin 8 (TRPM8) is a non-selective cation channel notable as a primary cold sensor in humans. It is also involved in a variety of (patho)physiological events including pain sensation, chronic cough, diabetes, obesity, and cancer. TRPM8 is modulated by a variety of stimuli including pH, temperature, cooling agents, voltage, lipid, and other proteins. However, the molecular mechanism underlining its function has not yet clear raising the need for isolated proteins to be well-characterized. Over 20 years, E. coli has been a heterologous expression system of interest due to its low cost and high yield. However, the lack of post-translational modifications and chaperone may cause a misfolding or affect protein function. Mammalian expression system addresses these drawbacks and is a good candidate for the functional study of complex human protein. Here I describe my research in optimizing the transfection, expression, and purification of the human TRPM8 from adherent Human Embryonic Kidney (HEK293) cells which can be used for small-scale studies including, but not limited to, planar lipid bilayer electrophysiology.

Understanding glycosaminoglycans’ (GAG) interaction with proteins is of growing interest for therapeutic applications. For instance, heparin is a GAG exploited for its ability to inhibit proteases, therefore inducing anticoagulation. For this reason, heparin is extracted in mass quantities from porcine intestine in the pharmaceutical field. Following a contamination in 2008, alternative sources for heparin are desired. In response, much research has been invested in the extraction of the naturally occurring polysaccharide, heparosan, from Escherichia coli K5 strain. As heparosan contains the same structural backbone as heparin, modifications can be made to produce heparin or heparin-like molecules from this source. Furthermore, isotopically labeled batches of heparosan can be produced to aid in protein-GAG interaction studies. In this study, a comparative look between extraction and purification methods of heparosan was taken. Fed-batch fermentation of this E. coli strain followed by subsequent purification yielded a final 13C/15N labeled batch of 90mg/L of heparosan which was then N-sulfated. Furthermore, a labeled sulfated disaccharide from this batch was utilized in a protein interaction study with CCL5. With NMR analysis, it was found that this heparin-like molecule interacted with CCL5 when its glucosamine residue was in a β-conformation. This represents an interaction reliant on a specific anomericity of this GAG molecule.

The 23-step total synthesis of dolastatin 16, a cyclic depsipeptide of marine origin, is presented. Included are syntheses of nonnatural amino acids dolamethylleuine and dolaphenvaline. The biological activity of the synthetic product differed from naturally isolated dolastatin 16, which may indicate the initial screening identified an inactive compound and the active one was not detected initially, or may be a result of the conformational dynamics induced by the proline residues. Additionally, a family of structural analogues to the bacillistatins, another cyclic marine depsipeptide, were synthesized. These were deemed the silstatins. 8 modifications were produced. The alterations aimed to introduce a heteroatomic residue for further derivatization, such as producing an antibody-drug conjugate. This introduction did in general decrease the neoplastic activity of these agents, as expected, but by modulating the lipophilicity of the compound we were able to salvage much of the potency of the bacillistatins while potentially allowing prodrug development.

Transient Receptor Potential (TRP) channels are a diverse class of ion channels notable as polymodal sensors. TRPM8 is a TRP channel implicated in cold sensation, nociception, and a variety of human diseases, including obesity and cancer. Despite sustained interest in TRPM8 since its discovery in 2001, many of the molecular mechanisms that underlie function are not yet clear. Knowledge of these properties could have implications for medicine and physiological understanding of sensation and signaling. Structures of TRP channels have proven challenging to solve, but recent Cryoelectron microscopy (Cryo-EM) structures of TRPV1 provide a basis for homology-based modeling of TRP channel structures and interactions. I present an ensemble of 11,000 Rosetta computational homology models of TRPM8 based on the recent Cryo-EM apo structure of TRPV1 (PDB code:3J5P). Site-directed mutagenesis has provided clues about which residues are most essential for modulatory ligands to bind, so the models presented provide a platform to investigate the structural basis of TRPM8 ligand modulation complementary to existing functional and structural information. Menthol and icilin appear to interact with interfacial residues in the sensor domain (S1-S4). One consensus feature of these sites is the presence of local contacts to the S4 helix, suggesting this helix may be mechanistically involved with the opening of the pore. Phosphatidylinositol 4,5-bisphosphate (PIP2)has long been known to interact with the C-terminus of TRPM8, and some of the homology models contain plausible binding pockets where PIP2 can come into contact with charged residues known to be essential for PIP2 modulation. Future in silico binding experiments could provide testable hypothesis for in vitro structural studies, and experimental data (e.g. distance constraints from electron paramagnetic resonance spectroscopy [EPR]) could further refine the models.

Glycosaminoglycan (GAG) binding by the cytokine pleiotrophin (PTN) was examined by expressing both thrombospondin 1 type-1 repeat domains of PTN separately, as PTN-N and PTN-C. PTN-N contains residues 31-89, and PTN-C contains residues 90-146. Nuclear magnetic resonance (NMR) experiments were conducted on both PTN-N and PTN-C to elucidate GAG binding regions. Titration with heparin dp6 showed a twofold increase in affinity when expressing PTN-N and PTN-C separately rather than as intact PTN. Paramagnetic relaxation rate enhancement experiments and surface paramagnetic relaxation enhancement (PRE) perturbation experiments were used to determine which residues were involved in GAG binding. One binding site was observed in PTN-N, around residue T82, and two binding sites were observed in PTN-C, one around residue K93 and the other around residue G142. These observed binding sites agree with the binding sites already proposed by the Wang lab group and other studies. Future work on the subject could be done on confirming that other varieties and length GAGs bind at the same sites, as well as examining the effect longer GAG fragments have on the affinity of intact PTN versus separate domains.

Carbohydrates are one of the four main building blocks of life, and are categorized as monosaccharides (sugars), oligosaccharides and polysaccharides. Each sugar can exist in two alternative anomers (in which a hydroxy group at C-1 takes different orientations) and each pair of sugars can form different epimers (isomers around the stereocentres connecting the sugars). This leads to a vast combinatorial complexity, intractable to mass spectrometry and requiring large amounts of sample for NMR characterization. Combining measurements of collision cross section with mass spectrometry (IM–MS) helps, but many isomers are still difficult to separate. Here, we show that recognition tunnelling (RT) can classify many anomers and epimers via the current fluctuations they produce when captured in a tunnel junction functionalized with recognition molecules. Most importantly, RT is a nanoscale technique utilizing sub-picomole quantities of analyte. If integrated into a nanopore, RT would provide a unique approach to sequencing linear polysaccharides.

The primary carbon fixing enzyme Rubisco maintains its activity through release of trapped inhibitors by Rubisco activase (Rca). Very little is known about the interaction, but binding has been proposed to be weak and transient. Extensive effort was made to develop Förster resonance energy transfer (FRET) based assays to understand the physical interaction between Rubisco and Rca, as well as understand subunit exchange in Rca.

Preparations of labeled Rubisco and Rca were utilized in a FRET-based binding assay. Although initial data looked promising, this approach was not fruitful, as no true FRET signal was observed. One possibility is that under the conditions tested, Rca is not able to undergo the structural reorganizations necessary to achieve binding-competent conformations. Rca may also be asymmetric, leading to less stable binding of an already weak interaction.

To better understand the structural adjustments of Rca, subunit exchange between different oligomeric species was examined. It was discovered that subunit exchange is nucleotide dependent, with ADP giving the fastest exchange, ATP giving slower exchange and ATPS inhibiting exchange. Manganese, like ADP, destabilizes subunit-subunit interactions for rapid and facile exchange between oligomers. Three different types of assemblies were deduced from the rates of subunit exchange: rigid types with extremely slow dissociation of individual protomers, tight assemblies with the physiological substrate ATP, and loose assemblies that provide fast exchange due to high ADP.

Information gained about Rca subunit exchange can be used to reexamine the physical interaction between Rubisco and Rca using the FRET-binding assay. These binding assays will provide insight into Rca states able to interact with Rubisco, as well as define conditions to generate bound states for structural analysis. In combination with assembly assays, subunit exchange assays and reactivation studies will provide critical information about the structure/function relationship of Rca in the presence of different nucleotides. Together, these FRET-based assays will help to characterize the Rca regulation mechanism and provide valuable insight into the Rubisco reactivation mechanism.

Nanomaterials have attracted considerable attention in recent research due to their wide applications in various fields such as material science, physical science, electrical engineering, and biomedical engineering. Researchers have developed many methods for synthesizing different types of nanostructures and have further applied them in various applications. However, in many cases, a molecular level understanding of nanoparticles and their associated surface chemistry is lacking investigation. Understanding the surface chemistry of nanomaterials is of great significance for obtaining a better understanding of the properties and functions of the nanomaterials. Nuclear magnetic resonance (NMR) spectroscopy can provide a familiar means of looking at the molecular structure of molecules bound to surfaces of nanomaterials as well as a method to determine the size of nanoparticles in solution. Here, a combination of NMR spectroscopic techniques including one- and two-dimensional NMR spectroscopies was used to investigate the surface chemistry and physical properties of some common nanomaterials, including for example, thiol-protected gold nanostructures and biomolecule-capped silica nanoparticles.

Silk is a natural protein fiber that features unique properties such as excellent mechanical properties, biocompatibility, and non-linear optical properties. These appealing physical properties originate from the silk structure, and therefore, the structural analysis of silk is of great importance for revealing the mystery of these impressive properties and developing novel silk-based biomaterials as well. Here, solid-state NMR spectroscopy was used to elucidate the secondary structure of silk proteins in N. clavipes spider dragline silk and B. mori silkworm silk. It is found that the Gly-Gly-X (X=Leu, Tyr, Gln) motif in spider dragline silk is not in a β-sheet or α-helix structure and is very likely to be present in a disordered structure with evidence for 31-helix confirmation. In addition, the conformations of the Ala, Ser, and Tyr residues in silk fibroin of B. mori were investigated and it indicates that the Ala, Ser, and Tyr residues are all present in disordered structures in silk I (before spinning), while show different conformations in silk II (after spinning). Specifically, in silk II, the Ala and Tyr residues are present in both disordered structures and β-sheet structures, and the Ser residues are present primarily in β-sheet structures.

Deoxyribonucleic acid (DNA) has emerged as an attractive building material for creating complex architectures at the nanometer scale that simultaneously affords versatility and modularity. Particularly, the programmability of DNA enables the assembly of basic building units into increasingly complex, arbitrary shapes or patterns. With the expanding complexity and functionality of DNA toolboxes, a quantitative understanding of DNA self-assembly in terms of thermodynamics and kinetics, will provide researchers with more subtle design guidelines that facilitate more precise spatial and temporal control. This dissertation focuses on studying the physicochemical properties of DNA tile-based self-assembly process by recapitulating representative scenarios and intermediate states with unique assembly pathways.

First, DNA double-helical tiles with increasing flexibility were designed to investigate the dimerization kinetics. The higher dimerization rates of more rigid tiles result from the opposing effects of higher activation energies and higher pre-exponential factors from the Arrhenius equation, where the pre-exponential factor dominates. Next, the thermodynamics and kinetics of single tile attachment to preformed “multitile” arrays were investigated to test the fundamental assumptions of tile assembly models. The results offer experimental evidences that double crossover tile attachment is determined by the electrostatic environment and the steric hindrance at the binding site. Finally, the assembly of double crossover tiles within a rhombic DNA origami frame was employed as the model system to investigate the competition between unseeded, facet and seeded nucleation. The results revealed that preference of nucleation types can be tuned by controlling the rate-limiting nucleation step.

The works presented in this dissertation will be helpful for refining the DNA tile assembly model for future designs and simulations. Moreover, The works presented here could also be helpful in understanding how individual molecules interact and more complex cooperative bindings in chemistry and biology. The future direction will focus on the characterization of tile assembly at single molecule level and the development of error-free tile assembly systems.