Amino acids and related targets are typically produced by well-characterized heterotrophs including Corynebacterium glutamicum and Escherichia coli. Recent efforts have sought to supplant these sugar-intensive processes through the metabolic engineering of cyanobacteria, which instead can directly utilize atmospheric carbon dioxide (CO2) and sunlight. One of the most promising among recently discovered photoautotrophic strains is Synechococcus elongatus UTEX 2973 (hereafter UTEX 2973), which has been reported to have doubling times as low as 1.5 hours. While encouraging, there are still major challenges preventing the widespread industrial acceptance of engineered cyanobacteria, chief among them is the scarcity of genetic tools and parts with which to engineer production strains. Here, UTEX 2973 was engineered to overproduce L-lysine through the heterologous expression of feedback-resistant copies of aspartokinase lysC and the L-lysine exporter ybjE from Escherichia coli, as aided by the characterization of novel combinations of genetic parts and expression sites. At maximum, using a plasmid-based expression system, a L-lysine titer of 556 ± 62.3 mg/L was attained after 120 hours, surpassing a prior report of photoautotrophic L-lysine bioproduction. Modular extension of the pathway then led to the novel photosynthetic production of the corresponding diamine cadaverine (55.3 ± 6.7 mg/L by 96 hours) and dicarboxylate glutarate (67.5 ± 2.2 mg/L by 96 hours). Lastly, mass transfer experiments were carried out to determine if the solubility of CO2 in and its rate of mass transfer to BG-11 media could be improved by supplementing it with various amines, including cadaverine. Ultimately, however, cyanobacteria grown in the presence of all tested amines was worse than in BG-11 alone, demonstrating the need for additional tolerance engineering to successfully implement this strategy.

Bioconversion of lignocellulosic sugars is often suboptimal due to global regulatory mechanisms such as carbon catabolite repression and incomplete/inefficient metabolic pathways. While conventional bioprocessing strategies for metabolic engineering have predominantly focused on a single engineered strain, the alternative development of synthetic microbial communities facilitates the execution of complex metabolic tasks by exploiting unique community features (i.e., modularity, division of labor, and facile tunability). In this dissertation, these features are leveraged to develop a suite of generalizable strategies and transformative technologies for engineering Escherichia coli coculture systems to more efficiently utilize lignocellulosic sugar mixtures. This was achieved by rationally pairing and systematically engineering catabolically-orthogonal Escherichia coli sugar specialists. Coculture systems were systematically engineered, as derived from either wild-type Escherichia coli W, ethanologenic LY180, lactogenic TG114 or succinogenic KJ122. Net catabolic activities were then readily balanced by simple tuning of the inoculum ratio between sugar specialists, ultimately enabling improved co-utilization (98% of 100 g L-1 total sugars) of glucose-xylose mixtures (2:1 by mass) under simple batch fermentation conditions. We next extended this strategy to a coculture-coproduction system capable of capturing and fixing CO2 evolved during biofuel production through inter-strain metabolic cooperation. Holistically, this work contributes to an improved understanding of the dynamic behavior of synthetic microbial consortia as enhanced bioproduction platforms and carbon conservation strategy for renewable fuels and chemicals from non-food carbohydrates

Metabolic engineering of bacteria has become a viable technique as a sustainable and efficient method for the production of biochemicals. Two main goals were explored: investigating styrene tolerance genes in E. coli and engineering cyanobacteria for the high yield production of L-serine. In the first study, genes that were shown to be highly differentially expressed in E. coli upon styrene exposure were further investigated by testing the effects of their deletion and overexpression on styrene tolerance and growth. It was found that plsX, a gene responsible for the phospholipid formation in membranes, had the most promising results when overexpressed at 10 µM IPTG, with a relative OD600 of 706 ± 117% at 175 mg/L styrene when compared to the control plasmid at the same concentration. This gene is likely to be effective target when engineering styrene- and other aromatic-producing strains, increasing titers by reducing their cytotoxicity.In the second study, the goal is to engineer the cyanobacterium Synechococcus sp. PCC 7002 for the overproduction of L-serine. As a robust, photosynthetic bacteria, it has potential for being used in such-rich states to capture CO2 and produce industrially relevant products. In order to increase L-serine titers, a key degradation gene, ilvA, must be removed. While ilvA is responsible for degrading L-serine into pyruvate, it is also responsible for initiating the only known pathway for the production of isoleucine. Herein, we constructed a plasmid containing the native A0730 gene in order to investigate its potential to restore isoleucine production. If functional, a Synechococcus sp. PCC 7002 ΔilvA strain can then be engineered with minimal effects on growth and an expected increase in L-serine accumulation.

To efficiently produce biofuels and meet the planet’s rising energy demands, different biofuel production methods need to be developed and improved. One of the ways is to produce fatty acid methyl esters (FAMEs) in Synechocystis sp. PCC 6803, a versatile strain of cyanobacteria. In this thesis, Synechocystis was engineered to produce and excrete methyl laurate. In this pathway, first, lauroyl-ACP from fatty acid biosynthesis is converted to laurate by a thioesterase (TE) from Umbellularia californica. Then, the laurate is methylated to methyl laurate by a juvenile hormone acid O-methyltransferase (DmJHAMT) from Drosophila melanogaster. The TE/∆slr1609 strain of Synechocystis sp. PCC 6803 contains the TE gene and lacks the slr1609 gene encoding an acyl–acyl carrier protein synthetase, which functions in free fatty acid reuptake. The DmJHAMT gene was introduced into this strain for FAME production.
The DmJHAMT gene was cloned into a vector that contains neutral sites from the Synechocystis genome, making it suitable for homologous recombination, and a kanamycin resistance gene, for selection. The obtained plasmid was verified using restriction digests and Sanger sequencing. The sequence analysis and comparison of the cDNA in the obtained plasmid and the mRNA transcript of the same gene revealed three amino acid differences. Subsequent comparison with homologous genes in other Drosophila species revealed the differences in the cDNA match those of the other species, and thus, the gene most likely is functional.
The plasmid was transformed into Synechocystis, and PCRs were used to confirm proper integration and segregation. The TE/∆slr1609/DmJHAMT strain produced 62 mg/L methyl laurate in 12 days under a light intensity of 150 µmol photons m-2 s-1, bubbled with 0.5% CO2 at a rate of 30 mL/min, and supplemented with 0.5 mM methionine. The laurate levels did not decrease over time, but instead, remained stagnant after day 3. When the strain was grown in the same conditions without methionine, the laurate concentrations continued to increase above 400 µM, suggesting minimal methyl laurate production and thus a strong need for methionine supplementation. This work provides further evidence of the viability and success of the introduced FAME production pathway, and improved efficiency may be gained in the future.

Abiotic stresses, such as heat, can drive protein misfolding and aggregation, leading to inhibition of cellular function and ultimately cell death. Unexpectedly, a thermotolerant Escherichia coli was identified from a pool of antibiotic resistant RNA polymerase β subunit (rpoB) mutants. This stress tolerant phenotype was characterized through exposure to high temperature and ethanol. After 30-minute exposure of cells to 55°C or 25% ethanol, the mutant displayed 100 times greater viability than the wild-type, indicating that the rpoB mutation may have broadly affected the cellular environment to reduce protein misfolding and/or prevent protein aggregation. To further test this hypothesis, we examined thermotolerance of cells lacking heat shock chaperone DnaJ (Hsp40), which is a cochaperone of one of the most abundant and conserved chaperones, DnaK (Hsp70). The deletion of dnaJ led to severe growth defects in the wild-type, namely a slower growth rate and extreme filamentation at 42°C. The severity of the growth defects increased after additionally deleting DnaJ analog, CbpA. However, these defects were significantly ameliorated by the rpoB mutation. Finally, the rpoB mutant was found to be minimally affected by the simultaneous depletion of DnaK and DnaJ compared to the wild-type, which failed to form single colonies at 37°C and 42°C. Based on these observations, it is proposed that the rpoB mutant’s robust thermotolerant phenotype results from a cellular environment protective against protein aggregation or improper folding. The folding environment of the rpoB mutants should be further examined to elucidate the mechanism by which both antibiotic resistance and thermotolerance can be conferred.

Aromatic compounds have traditionally been generated via petroleum feedstocks and have wide ranging applications in a variety of fields such as cosmetics, food, plastics, and pharmaceuticals. Substantial improvements have been made to sustainably produce many aromatic chemicals from renewable sources utilizing microbes as bio-factories. By assembling and optimizing native and non-native pathways to produce natural and non-natural bioproducts, the diversity of biochemical aromatics which can be produced is constantly being improved upon. One such compound, 2-Phenylethanol (2PE), is a key molecule used in the fragrance and food industries, as well as a potential biofuel. Here, a novel, non-natural pathway was engineered in Escherichia coli and subsequently evaluated. Following strain and bioprocess optimization, accumulation of inhibitory acetate byproduct was reduced and 2PE titers approached 2 g/L – a ~2-fold increase over previously implemented pathways in E. coli. Furthermore, a recently developed mechanism to

allow E. coli to consume xylose and glucose, two ubiquitous and industrially relevant microbial feedstocks, simultaneously was implemented and systematically evaluated for its effects on L-phenylalanine (Phe; a precursor to many microbially-derived aromatics such as 2PE) production. Ultimately, by incorporating this mutation into a Phe overproducing strain of E. coli, improvements in overall Phe titers, yields and sugar consumption in glucose-xylose mixed feeds could be obtained. While upstream efforts to improve precursor availability are necessary to ultimately reach economically-viable production, the effect of end-product toxicity on production metrics for many aromatics is severe. By utilizing a transcriptional profiling technique (i.e., RNA sequencing), key insights into the mechanisms behind styrene-induced toxicity in E. coli and the cellular response systems that are activated to maintain cell viability were obtained. By investigating variances in the transcriptional response between styrene-producing cells and cells where styrene was added exogenously, better understanding on how mechanisms such as the phage shock, heat-shock and membrane-altering responses react in different scenarios. Ultimately, these efforts to diversify the collection of microbially-produced aromatics, improve intracellular precursor pools and further the understanding of cellular response to toxic aromatic compounds, give insight into methods for improved future metabolic engineering endeavors.

Traditional methods of genetic engineering are often limited to relatively few rounds of gene additions, deletions, or alterations due to a lack of additional available antibiotic resistance markers. Counter-selection marker methods can be used to remove and reuse marker genes as desired, resulting in markerless engineered strains and allowing for theoretically unlimited rounds of genetic modifications. The development of suitable counter-selection markers is vital for the development of model organisms such as cyanobacteria as biotechnological platforms.
In the hopes of providing other researchers with a new tool for markerless genetic engineering of cyanobacteria, the toxin MazF from E. coli was developed as a counter-selection marker in the most widely used cyanobacterium, Synechocystis sp. PCC 6803. The mazF gene from E. coli was cloned and inserted into a plasmid vector for downstream transformation of Synechocystis. The plasmid construct also contained two homologous flanking regions for integration of the insert into the Synechocystis genome, a nickel-inducible response regulator and promoter to control MazF expression, and a kanamycin resistance gene to serve as the antibiotic marker. In order to ensure the mazF plasmids could be cloned in a MazF-sensitive E. coli host even with slight promoter leakage, MazF expression was toned down by decreasing the efficiency of translation initiation by inserting base pairs between the ribosome binding site and the start codon of the mazF gene. Following successful cloning by E. coli, the mazF plasmids were then used to transform Synechocystis to create mazF mutant strains. Genomic analysis confirmed the successful transformation and segregation of mazF mutant strains containing the desired marker cassette. Phenotypic analysis revealed both growth arrest and production of mazF transcripts in mazF mutant strains following the addition of nickel to the cell cultures, indicating successful nickel-induced MazF expression as desired.

The primary objective of this project is to further the knowledge about SCL26 family of anion transporters. The goals of the experiment were to find the lowest sulfate concentration where the yeast without Sulp1 and Sulp2 is able to grow, but it grows very slowly, and to find a higher sulfate concentration where the yeast grows quickly, with or without the sulfate transporters. The lowest sulfate concentration where the yeast without the sulfate transporters is able to grow was determined to be 2-4 mM, however, this range can likely be refined by more quantitative analytical methods. At a sulfate concentration of 20 mM sulfate or higher, the yeast is able to grow quickly without high-affinity sulfate transporters. The next step in the project is to re-introduce the Sulp1 and Sulp2 genes into the yeast, so that growth in low and high sulfate conditions can be compared with and without the Sulp1 and Sulp2 proteins. The long-term goals of the project are to bring experience with yeast to Dr. Nannenga’s structural discovery lab, to determine if yeast sulfate transporters respond in the same way to drug candidates as human sulfate transporters, and to determine the structure of the proteins using cryo-electron microscopy.

Renewable bioproduction through fermentation of microbial species such as E. coli shows much promise in comparison to conventional fossil fuel based chemical production. Although Escherichia coli is a workhorse for bioproduction, there are inherent limitations associated with the use of this organism which negatively affect bioproduction. One example is E. coli fermentative growth being less robust compared to some microbes such as Lactobacilli under anaerobic and microaerobic fermentation conditions. Identification and characterization of its fermentative growth constraints will help in making E. coli a better fermentation host. In this thesis, I demonstrate that Lactobacillus plantarum WCFS1 has desirable fermentative capabilities that may be transferrable to E. coli through genetic engineering to alleviate growth restraints. This has led to the hypothesis that these L. plantarum DNA sequences are transferrable through a genomic library. A background of comparative genomics and complementary literature review has demonstrated that E. coli growth may be hindered by stress from many toxin-antitoxin systems. L. plantarum WCFS1 optimizes amino acid catabolism over glycolysis to generate high ATP levels from reducing agents and proton motive force, and Lactobacilli are resistant to acidic environments and encodes a wide variety of acid transporters that could help E. coli fermentative growth. Since a great variety of L. plantarum genes may contribute to its fermentative capabilities, a gDNA library containing L. plantarum WCFS1 genes has been successfully constructed for testing in E. coli bioproducers to search for specific genes that may enhance E. coli fermentative performance and elucidate the molecular basis of Lactobacillus fermentative success.

Synechocystis sp. PCC 6803 is a readily transformable cyanobacteria used to study cyanobacterial genetics, as well as production of biofuels, polyesters, and other industrial chemicals. Free fatty acids are precursors to biofuels which are used by Synechocystis cells as a means of energy storage. By genetically modifying the cyanobacteria to expel these chemicals, costs associated with retrieving the products will be reduced; concurrently, the bacteria will be able to produce the products at a higher concentration. This is achieved by adding genes encoding components of the Escherichia coli AcrAB-TolC efflux system, part of the resistance-nodulation-division (RND) transporter family, to Synechocystis sp. PCC 6803. AcrAB-TolC is a relatively promiscuous multidrug efflux pump that is noted for expelling a wide range of substrates including dyes, organic solvents, antibiotics, and free fatty acids. Adding components of the AcrAB-TolC multidrug efflux pump to a previously created high free fatty acid producing strain, SD277, allowed cells to move more free fatty acids to the extracellular environment than did the parent strain. Some of these modifications also improved tolerance to antibiotics and a dye, rhodamine 6G. To confirm the function of this exogenous efflux pump, the genes encoding components of the AcrAB-TolC efflux pump were also added to Synechocystis sp. PCC 6803 and shown to grow on a greater concentration of various antibiotics and rhodamine 6G. Various endogenous efflux systems have been elucidated, but their usefulness in expelling products currently generated in Synechocystis is limited. Most of the elucidated pumps in the cyanobacteria are part of the ATP-binding cassette superfamily. The knowledge of the resistance-nodulation-division (RND) family transporters is limited. Two genes in Synechocystis sp. PCC 6803, slr2131 and sll0180 encoding homologs to the genes that encode acrB and acrA, respectively, were removed and the modifications resulted in changes in resistance to various antibiotics and a dye and also had an impact on free fatty acid secretion. Both of these deletions were complemented independently with the homologous E. coli gene and the resulting cyanobacteria strains had some of the inherent resistance restored to chloramphenicol and free fatty acid secretion was modified when compared to the wild-type and a high free fatty acid producing strain.