This thesis analyzed Canon GPR-30 Black Standard Yield Toner in hopes to gain better understanding of the additives and plastic used in a popular photocopier toner formulation. By analyzing the toner’s composition from the perspective of its recyclability and potential to be manufactured using recycled plastic, this thesis hoped to fill a gap in current literature regarding how toner fits into a circular economy. While the analysis of the selected toner was ultimately inconclusive, three hypotheses about the toner’s composition are put forth based upon data from differential scanning calorimetry (DSC), solubility analysis, and Fourier Transform Infrared (FTIR) spectroscopy experimentation. It is hypothesized that the toner is most likely composed of either polymethyl methacrylate (PMMA) or polyethylene terephthalate (PET). Both of these polymers have characteristic FTIR peaks that were exhibited in the toner spectra and both polymers exhibit similar solubility behavior to toner samples. However, the glass transition temperature and melting temperature of the toner sampled were 58℃ and 74.5℃ respectively, both of which are much lower than that of PMMA and PET. Thus, a third hypothesis that would better support DSC findings is that the toner is primarily composed of nylon 6,6. While DSC data best matches this polymer, FTIR data seems to rule out nylon 6,6 as an option because its characteristic peaks were not found in experimental data. Thus, the Canon GPR-30 Black Standard Yield Toner is probably made from either PMMA or PET. Both PMMA and PET are 100% recyclable plastics which are commonly repurposed at recycling facilities, however, unknowns regarding toner additives make it difficult to determine how this toner would be recycled. If the printing industry hopes to move towards a circular economy in which plastic can be recycled to use towards toner manufacturing and toner can be “unprinted” from paper to be recycled into new toner, it is likely that monetary incentives or government regulations will need to be introduced to promote the sharing of toner formulations for recycling purposes.

High-Density polyethylene (HDPE) is the most used polymer on earth. Since it is used in such large quantities, it has become the most extensively produced polymer on the planet. Unfortunately, the rate of reusing or recycling HDPE is far behind the rate of production leading to plastic pollution. Most of this waste plastic ends up in landfills or incineration to recover energy. Plastic production consumes a lot of energy and is associated with CO2 emissions. This method of disposing plastic only adds to the environmental pollution rather than improving it. Primary reasons for low recycling rate appear to be more political and financial. In the US, the rate of recycling was less than 10% whereas Japan showed a recycling rate of more than 80%. The other aspect of low recycling is financial. In order to make recycling a financially viable process, efforts have to be made to streamline the process of waste collection, segregation and technically feasible process. This study focusses on the technical aspect of the issue. Even though efforts have been made to recycle HDPE, none of the processes have been recycle HDPE with financial viability, recovering full value of plastic, minimum CO2 emissions and minimum change in properties of the polymer. This study focusses on effective recycling of HDPE with minimum change in its properties. Dissolution has been used to dissolve the polymer selectively and then reprecipitating the polymer using a non-solvent to obtain the polymer grains. This is followed by mixing additives to the polymer grains to minimize degradation of the polymer during the extrusion process. The polymer is then extruded in an extruder beyond its melting temperature. This process is repeated for 5 cycles. After each cycle, the polymer is tested for its properties using the Tensile Testing, Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and Dynamic Mechanicalii Analysis (DMA). It was observed that the rheological properties of the polymer were maintained after the 5th recycle whereas the mechanical properties deteriorated after the 2nd recycle. Also, increase in carbonyl index was observed after 5th recycle.

Drug delivery has made a significant contribution to cancer immunotherapy and can have a tremendous impact on modulating immunometabolism, thereby affecting cancer outcomes. Notably, the science of delivery of cancer vaccines and immunotherapeutics, modulating immune cell functions has inspired development of several successful companies and clinical products. For example, cancer vaccines require activation of dendritic cells (DCs) and tumour associated Mɸs (TAMs) through modulation of their energy metabolism (e.g., glycolysis, glutaminolysis, Krebs cycle). Similar to activated immune cells, cancer cells also upregulate glucose and glutamine transporters for proliferation and survival. Cancer cells having accelerated energy metabolism, which has been exploited as a target for various therapeutic studies. In the first strategy, an immunometabolism strategy based on sustained release of succinate from biomaterials, which incorporate succinate in the backbone of the polymer was developed. This study demonstrates that succinate-based polymeric microparticles act as alarmins by modulating the immunometabolism of DCs and Mɸs to generate robust pro-inflammatory responses for melanoma treatment in immunocompetent young as well as aging mice. In the second strategy, a biomaterial-based strategy was developed to deliver metabolites one-step downstream of the node where the glycolytic pathway is inhibited, to specifically rescue DCs from glycolysis inhibition. The study successfully demonstrated for the first time that the glycolysis of DCs can be rescued both in vitro and in vivo using a biomaterial strategy of delivering metabolites downstream of the inhibitory node. Overall, it is believed that advanced drug delivery strategies will play an important role in marrying the fields of immunometabolism and immunotherapy to generate translatable anti-cancer treatments.

Tissues within the body enable proper function throughout an individual’s life. After severe injury or disease, many tissues do not fully heal without surgical intervention. The current surgical procedures aimed to repair tissues are not sufficient to fully restore functionality. To address these challenges, current research is seeking new tissue engineering approaches to promote tissue regeneration and functional recovery. Of particular interest, biomaterial scaffolds are designed to induce tissue regeneration by mimicking the biophysical and biochemical aspects of native tissue. While many scaffolds have been designed with homogenous properties, many tissues are heterogenous in nature. Thus, fabricating scaffolds that mimic these complex tissue properties is critical for inducing proper healing after injury. Within this dissertation, scaffolds were designed and fabricated to mimic the heterogenous properties of the following tissues: (1) the vocal fold, which is a complex 3D structure with spatially controlled mechanical properties; and (2) musculoskeletal tissue interfaces, which are fibrous tissues with highly organized gradients in structure and chemistry. A tri-layered hydrogel scaffold was fabricated through layer-by-layer stacking to mimic the mechanical structure of the vocal fold. Furthermore, magnetically-assisted electrospinning and thiol-norbornene photochemistry was used to fabricate fibrous scaffolds that mimic the structural and chemical organization of musculoskeletal interfacial tissues. The work presented in this dissertation further advances the tissue engineering field by using innovative techniques to design scaffolds that recapitulate the natural complexity of native tissues.

This honors thesis covers an overview of the the motivation, objectives, and projects of the Xie Research Group, focusing on the mechanical effect of dopants (through p-doping) on the structural domains of conjugated polymers (specifically P3DT). The ability to sustainably 3D-print conjugated polymers has the potential to impact a variety of industries (personalized technology, medical treatment, replacement of metals, etc).