Summer daytime cooling efficiency of various land cover is investigated for the urban core of Phoenix, Arizona, using the Local-Scale Urban Meteorological Parameterization Scheme (LUMPS). We examined the urban energy balance for 2 summer days in 2005 to analyze the daytime cooling-water use tradeoff and the timing of sensible heat reversal at night. The plausibility of the LUMPS model results was tested using remotely sensed surface temperatures from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) imagery and reference evapotranspiration values from a meteorological station. Cooling efficiency was derived from sensible and latent heat flux differences. The time when the sensible heat flux turns negative (sensible heat flux transition) was calculated from LUMPS simulated hourly fluxes. Results indicate that the time when the sensible heat flux changes direction at night is strongly influenced by the heat storage capacity of different land cover types and by the amount of vegetation. Higher heat storage delayed the transition up to 3 h in the study area, while vegetation expedited the sensible heat reversal by 2 h. Cooling efficiency index results suggest that overall, the Phoenix urban core is slightly more efficient at cooling than the desert, but efficiencies do not increase much with wet fractions higher than 20%. Industrial sites with high impervious surface cover and low wet fraction have negative cooling efficiencies. Findings indicate that drier neighborhoods with heterogeneous land uses are the most efficient landscapes in balancing cooling and water use in Phoenix. However, further factors such as energy use and human vulnerability to extreme heat have to be considered in the cooling-water use tradeoff, especially under the uncertainties of future climate change.

Remote sensing has demonstrated to be an instrumental tool in monitoring land changes as a result of anthropogenic change or natural disasters. Most disaster studies have focused on large-scale events with few analyzing small-scale disasters such as tornadoes. These studies have only provided a damage assessment perspective with the continued need to assess reconstruction. This study attempts to fill that void by examining recovery from the 1999 Moore, Oklahoma Tornado utilizing Landsat TM and ETM+ imagery. Recovery was assessed for 2000, 2001 and 2002 using spectral enhancements (vegetative and urban indices and a combination of the two), a recovery index and different statistical thresholds. Classification accuracy assessments were performed to determine the precision of recovery and select the best results. This analysis proved that medium resolution imagery could be used in conjunction with geospatial techniques to capture recovery. The new indices, Shortwave Infrared Index (SWIRI) and Coupled Vegetation and Urban Index (CVUI), developed for disaster management, were the most effective at discerning reconstruction using the 1.5 standard deviation threshold. Recovery rates for F-scale damages revealed that the most incredibly damaged areas associated with an F5 rating were the slowest to recover, while the lesser damaged areas associated with F1-F3 ratings were the quickest to rebuild. These findings were consistent for 2000, 2001 and 2002 also exposing that complete recovery was never attained in any of the F-scale damage zones by 2002. This study illustrates the significance the biophysical impact has on recovery as well as the effectiveness of using medium resolution imagery such as Landsat in future research.

Spatial uncertainty refers to unknown error and vagueness in geographic data. It is relevant to land change and urban growth modelers, soil and biome scientists, geological surveyors and others, who must assess thematic maps for similarity, or categorical agreement. In this paper I build upon prior map comparison research, testing the effectiveness of similarity measures on misregistered data. Though several methods compare uncertain thematic maps, few methods have been tested on misregistration. My objective is to test five map comparison methods for sensitivity to misregistration, including sub-pixel errors in both position and rotation. Methods included four fuzzy categorical models: fuzzy kappa's model, fuzzy inference, cell aggregation, and the epsilon band. The fifth method used conventional crisp classification. I applied these methods to a case study map and simulated data in two sets: a test set with misregistration error, and a control set with equivalent uniform random error. For all five methods, I used raw accuracy or the kappa statistic to measure similarity. Rough-set epsilon bands report the most similarity increase in test maps relative to control data. Conversely, the fuzzy inference model reports a decrease in test map similarity.