The application of microalgal biofilms in wastewater treatment has great advantages such as abolishing the need for energy intensive aerators and recovering nutrients as energy, thus reducing the energy requirement of wastewater treatment several-fold. A 162 cm2 algal biofilm reactor with good wastewater treatment performance and a regular harvesting procedure was studied at lab scale to gain an understanding of effectual parameters such as hydraulic retention time (HRT; 2.6 and 1.3 hrs), liquid level (LL; 0.5 and 1.0 cm), and solids retention time (SRT; 3 and 1.5 wks). A revised synthetic wastewater “Syntho 3.7” was used as a surrogate of domestic primary effluent for nutrient concentration consistency in the feed lines. In the base case (2.6 hr HRT, 0.5 cm LL, and 3 wk SRT), percent removals of 69 ± 2 for total nitrogen (TN), 54 ± 21 for total phosphorous (TP), and 60 ± 7 for chemical oxygen demand (COD) were achieved and 4.0 ± 1.6 g/m2/d dry biomass was produced. A diffusion limitation was encountered when increasing the liquid level, while the potential to further decrease the HRT remains. Nonlinear growth kinetics was observed in comparing SRT variations, and promoting autotrophic growth seems possible. Future work will look towards producing a mathematical model and further testing the aptness of this system for large-scale implementation.

The finite supply of current energy production materials has created opportunities for the investigation of alternative energy sources in many fields. One example is the use of microorganisms in bioenergy applications, such as microbial fuel cells. Present in many types of environments, microorganisms with the ability to respire solid electron acceptors have become of increasing relevance to alternative energy and wastewater treatment research. In this dissertation, several aspects of anode respiration are investigated, with the goal of increasing the limited understanding of the mechanisms of electron transport through the use of advanced electrochemical methods. Biofilms of Geobacter sulfurreducens, the model anode respiring organism, as well as its alkaliphilic relative, Geoalkalibacter ferrihydriticus, were investigated using chronoamperometry, electrochemical impedance spectroscopy, and cyclic voltammetry.

In G. sulfurreducens, two distinct pathways of electron transport were observed through the application of advanced electrochemical techniques on anode biofilms in microbial electrochemical cells. These pathways were found to be preferentially expressed, based on the poised anode potential (redox potential) of the electrode. In Glk. ferrihydriticus, four pathways for electron transport were found, showing an even greater diversity in electron transport pathway utilization as compared to G. sulfurreducens. These observations provide insights into the diversity of electron transport pathways present in anode-respiring bacteria and introduce the necessity of further characterization for pathway identification.

Essential to science today, communication of pressing scientific issues to the lay audience may present certain difficulties. This can be seen especially with the topics that are considered socio-scientific issues, those considered controversial in society but not for scientists. This dissertation explores the presentation of alternative and renewable energy technologies and climate change in undergraduate education. In introductory-level Biology, Chemistry, and Physics textbooks, the content and terminology presented were analyzed for individual textbooks and used to evaluate discipline-based trends. Additional extensions were made between teaching climate change with the active learning technique of citizen science using past research gains from studies of evolution. These observations reveal patterns in textbook content for energy technologies and climate change, as well as exploring new aspects of teaching techniques.

Microbial electrochemical cells (MXCs) serve as an alternative anaerobic technology to anaerobic digestion for efficient energy recovery from high-strength organic wastes such as primary sludge (PS). The overarching goal of my research was to address energy conversion from PS to useful resources (e.g. hydrogen or hydrogen peroxide) through bio- and electro-chemical anaerobic conversion processes in MXCs.

First, a new flat-pate microbial electrolysis cell (MEC) was designed with high surface area anodes using carbon fibers, but without creating a large distance between the anode and the cathode (<0.5 cm) to reduce Ohmic overpotential. Through the improved design, operation, and electrochemical characterization, the applied voltages were reduced from 1.1 to ~0.85 V, at 10 A m-2. Second, PS conversion was examined through hydrolysis, fermentation, methanogenesis, and/or anode respiration. Since pretreatment often is required to accelerate hydrolysis of organic solids, I evaluated pulsed electric field technology on PS showing a modest improvement of energy conversion through methanogenesis and fermentation, as compared to the conversion from waste activated sludge (WAS) or WAS+PS. Then, a two-stage system (prefermented PS-fed MEC) yielded successful performance in terms of Coulombic efficiency (95%), Coulombic recovery (CR, 80%), and COD-removal efficiency (85%). However, overall PS conversion to electrical current (or CR) through pre-fermentation and MEC, was just ~16%. Next, a single-stage system (direct PS-fed MEC) with semi-continuous operation showed 34% CR at a 9-day hydraulic retention time. The PS-fed MEC also showed an important pH dependency, in which high pH (> 8) in the anode chamber improved anode respiration along with methanogen inhibition. Finally, H2O2 was produced in a PS-fed microbial electrochemical cell with a low energy requirement (~0.87 kWh per kg H2O2). These research developments will provide groundbreaking knowledge for MXC design, commercial application, and anaerobic energy conversion from other high-strength organic wastes to resources.

Bioremediation of trichloroethene (TCE) using Dehalococcoides mccartyi-containing microbial cultures is a recognized and successful remediation technology. Our work with an upflow anaerobic sludge blanket (UASB) reactor has shown that high-performance, fast-rate dechlorination of TCE can be achieved by promoting bioflocculation of Dehalococcoides mccartyi-containing cultures. The bioreactor achieved high maximum conversion rates of 1.63 ± 0.012 mmol Cl- Lculture-1 h-1 at an HRT of 3.6 hours and >97% dechlorination of TCE to ethene while continuously fed 2 mM TCE. The UASB generated bioflocs from a microbially heterogeneous dechlorinating culture and produced Dehalococcoides mccartyi densities of 1.73x10-13 cells Lculture-1 indicating that bioflocculation of Dehalococcoides mccartyi-containing cultures can lead to high density inocula and high-performance, fast-rate bioaugmentation culture for in situ treatment. The successful operation of our pilot scale bioreactor led to the assessment of the technology as an onsite ex-situ treatment system. The bioreactor was then fed TCE-contaminated groundwater from the Motorola Inc. 52nd Street Plant Superfund site in Phoenix, AZ augmented with the lactate and methanol. The bioreactor maintained >99% dechlorination of TCE to ethene during continuous operation at an HRT of 3.2 hours. Microbial community analysis under both experimental conditions reveals shifts in the community structure although maintaining high rate dechlorination. High density dechlorinating cultures containing bioflocs can provide new ways to 1) produce dense bioaugmentation cultures, 2) perform ex-situ bioremediation of TCE, and 3) increase our understanding of Dehalococcoides mccartyi critical microbial interactions that can be exploited at contaminated sites in order to improve long-term bioremediation schemes.