Existing water quality sensors in surface, environmental, and drinking water systems are not well suited for long-term, scalable use as they require calibration, replacement of reagents, and are subject to biofouling which degrades measurement accuracy. Microbial Potentiometric Sensors (MPSs) offer an alternative approach to water quality monitoring by monitoring a biofilm-mediated potentiometric response to diverse water quality parameters. MPS biofilms grow naturally on graphite electrodes in diverse aqueous systems, are regenerative, and their potentiometric response correlates with numerous water quality parameters. As such, the overarching hypothesis of this dissertation is that MPS signal can be used to assess water quality trends and that its signal is driven by biofilm vitality. To test this hypothesis, machine learning, statistical regression, and the use of more complex, impedimetric measurement techniques were explored to characterize water quality trends in diverse water systems. This was accomplished by completing three dissertation objectives: 1.) Assess whether Machine Learning/Artificial Intelligence (ML/AI) tools can be used to disaggregate various surface water quality parameter values from Open Circuit Potential (OCP) signals produced by MPSs; 2.) Determine whether residual free chlorine concentration in drinking water could be determined by monitoring MPSs; and 3.) Determine whether OCP and/or Electrochemical Impedance Spectroscopy (EIS)-derived impedance data from an MPS can be used to determine water quality trends while confirming its biological origins. The findings confirm the hypothesis by demonstrating that ML/AI can be used to disaggregate MPS signal and determine numerous water quality parameters, offering unique opportunities for real-time monitoring of aqueous environments. Additionally, MPSs are particularly useful in measuring free chlorine concentrations in drinking water distribution systems which offers opportunities for scalable, in-situ, continuous monitoring of chlorine throughout a distribution network. Finally, the findings demonstrate that coupling MPSs’ OCP signal with more advanced measurement techniques such as EIS can improve understanding of drinking water quality trends, however current open source, affordable technologies capable of conducting EIS are prone to high measurement noise and are not currently accurate enough to be used in drinking water systems.

Zero-Valent Metals (ZVM) are highly reactive materials and have been proved to be effective in contaminant reduction in soils and groundwater remediation. In fact, zero-Valent Iron (ZVI) has proven to be very effective in removing, particularly chlorinated organics, heavy metals, and odorous sulfides. Addition of ZVI has also been proved in enhancing the methane gas generation in anaerobic digestion of activated sludge. However, no studies have been conducted regarding the effect of ZVM stimulation to Municipal Solid Waste (MSW) degradation. Therefore, a collaborative study was developed to manipulate microbial activity in the landfill bioreactors to favor methane production by adding ZVMs. This study focuses on evaluating the effects of added ZVM on the leachate generated from replicated lab scale landfill bioreactors. The specific objective was to investigate the effects of ZVMs addition on the organic and inorganic pollutants in leachate. The hypothesis here evaluated was that adding ZVM including ZVI and Zero Valent Manganese (ZVMn) will enhance the removal rates of the organic pollutants present in the leachate, likely by a putative higher rate of microbial metabolism. Test with six (4.23 gallons) bioreactors assembled with MSW collected from the Salt River Landfill and Southwest Regional Landfill showed that under 5 grams /liter of ZVI and 0.625 grams/liter of ZVMn additions, no significant difference was observed in the pH and temperature data of the leachate generated from these reactors. The conductivity data suggested the steady rise across all reactors over the period of time. The removal efficiency of sCOD was highest (27.112 mg/lit/day) for the reactors added with ZVMn at the end of 150 days for bottom layer, however the removal rate was highest (16.955 mg/lit/day) for ZVI after the end of 150 days of the middle layer. Similar trends in the results was observed in TC analysis. HPLC study indicated the dominance of the concentration of heptanoate and isovalerate were leachate generated from the bottom layer across all reactors. Heptanoate continued to dominate in the ZVMn added leachate even after middle layer injection. IC analysis concluded the chloride was dominant in the leachate generated from all the reactors and there was a steady increase in the chloride content over the period of time. Along with chloride, fluoride, bromide, nitrate, nitrite, phosphate and sulfate were also detected in considerable concentrations. In the summary, the addition of the zero valent metals has proved to be efficient in removal of the organics present in the leachate.

United States Environmental Protection Agency (USEPA) had identified and recommended air quality monitoring to take place at 63 schools throughout the country. Unfortunately, tribal schools were not considered during the time USEPA conducted the analysis. The importance of identifying any air toxic pollutants affecting school children needs to be analyzed. Conducting an air monitoring toxic analysis on the Navajo Nation at Church Rock Elementary School, Church Rock, New Mexico (CRNM) was carried out. The current school location posed a concern, in regards to the surrounding stationary, mobile, and natural emissions emitted all types of toxic pollutants. USEPA sponsors various air monitoring program, which Tribal Air Monitoring Support (TAMS) program undertook, and offered tribal programs, organizations or agencies to utilized air monitoring equipment's. The air monitoring setup was conducted with the contract Eastern Research Group, Inc. (ERG) laboratory, where collection of 24-hour ambient air samples for 60 days on a 6-day sampling interval were performed. The analysis for volatile organic compounds (VOCs)were collected from canister samples using USEPA Compendium Method TO-15, polycyclic aromatic hydrocarbons (PAHs) from polyurethane foam (PUF) and XAD-2 resin samples using USEPA Compendium Method TO-13A. Carbonyl compounds were collected by sorbent cartridge samples using USEPA Compendium Method TO-11A, and trace of metals from filters were sampled using USEPA Compendium Method IO-3.5 and FEM EQL-0512-202. A total of 53 VOC concentrations were greater than 1 μg/m3, where dichlorodifluoromethane, trichlorofluoromethane, chloromethane, dichloromethane, propylene, toluene, acrolein and acetylene were detected. A total of 23 carbonyl compound concentrations were greater than 1 μg/m3, where acetone and formaldehyde were measured. Naphthalene average with the highest average for PAHs, where phenanthrene and retene were the second and third highest averages. As for the metals the highest averages resulted from manganese, chromium and lead. Overall, the air toxic pollutants resulted from CRNM surrounding monitoring site were detected. Identifying the potential emitter source or sources cannot be assessed.

Since its launch by the US Green Building Council (USGBC), Leadership in Energy and Environmental Design (LEED) certification has been postured as the "gold standard" for environmentally conscious, sustainable building design, construction and operations. However, as a "living measurement", one which requires ongoing evaluation and reporting of attainment and compliance with LEED certification requirements, there is none. Once awarded, LEED certification does not have a required reporting component to effectively track continued adherence to LEED standards. In addition, there is no expiry tied to the certification; once obtained, a LEED certification rating is presumed to be a valid representation of project certification status. Therefore, LEED lacks a requirement to demonstrate environmental impact of construction materials and building systems over the entire life of the project. Consequently, LEED certification is merely a label rather than a true representation of ongoing adherence to program performance requirements over time. Without continued monitoring and reporting of building design and construction features, and in the absence of recertification requirements, LEED is, in reality, a gold star rather than a gold standard. This thesis examines the lack of required ongoing monitoring, reporting, or recertification requirements following the award by the USGBC of LEED certification; compares LEED with other international programs which do have ongoing reporting or recertification requirements; demonstrates the need and benefit of ongoing reporting or recertification requirements; and explores possible methods for implementation of mandatory reporting requirements within the program.

Pharmaceutical and Personal Care Products (PPCPs) are a large, diverse group of emerging contaminants comprised of pharmaceuticals, plasticizers, detergents, and insecticides. Studies have shown that PPCPs are entering aquatic environments, wastewaters, and water supplies. The occurrence of these PPCPs has generated concern resulting in proposed federal legislation that could require control, monitoring, and treatment of Pharmaceutical and Personal Care Products by Publicly Owned Treatment Works (POTWs). This study evaluated the potential financial impact this proposed legislation could have on U.S. POTWs using City of Mesa, Arizona as a model POTW. The current laws concerning PPCPs as well as the proposed legislation were described. The proposed federal legislation would create investigational studies about PPCPs. The studies could lead to regulations concerning the control, monitoring, and treatment of PPCPs by POTWs. The potential financial costs of the following strategies were assessed: multiple barriers concept for PPCP control or prevention programs by POTWs, PPCP monitoring of wastewater, and upgrading POTW treatment technology for PPCP removal. Study results found no new wastewater treatment technologies were economically suitable for POTWs, however, community education and programs such as Household Take-back programs could be financially viable.

In 2009, cap and trade was at the forefront of political and environmental discussions. At this time, the American Clean Energy and Security Act passed in the United States House of Representatives. Market based systems are alternatives to traditional regulatory methods such as command and control. This study intended to assess the attitudes of environmental leaders who managed air emissions as a part of their job responsibilities. The attitude of these individuals would have influenced their acceptance of this method as a program to reduce environmental pollution and improve air quality. The purpose of this study was to evaluate the attitudes of South Carolinian Title V environmental leaders toward cap and trade. Additionally, the study intended to determine if experience impacted the attitudes of survey respondents. Lastly, the study determined if environmental leaders found current methods such as command and control effective in air pollution regulation. The survey used the Likert Method of Summated Ratings. Environmental leaders reviewed attitudinal statements about the various subjects. The leaders selected an agreement level which determined their attitudes toward the statement. Numerical response ratings evaluated the leader's attitude by experience level. The survey found that respondents had negative attitudes toward cap and trade. The respondents had a positive attitude toward traditional regulatory methods such as command and control. Lastly, the results concluded that environmental experience did not have an impact on the respondents' attitude toward cap and trade. Therefore, it can be concluded that the environmental leaders prefer traditional air pollution regulatory methods in comparison to alternatives such as cap and trade.

The purpose of drinking water regulations is to keep our drinking water safe from contaminants. This research reviewed federal regulation including the Contaminant Candidate List (CCL) regulatory process, the public health effects of six nitrosamines in drinking water, analyzes of occurrence data from Unregulated Contaminant Monitoring Rule (UCMR 2) and suggests how nitrosamines can be regulated. Currently only total trihalomethanes (THM) and haloacetic acids (HA) are regulated at the federal level. However, California has notification action levels and Massachusetts has guidelines of 10 ng/L for nitrosamine concentration. Nitrosamine data collected under the UCMR 2 were analyzed to assess the occurrence and the effect of disinfectant type and source water type. The data showed that N-nitrosodimethylamine (NDMA) was detected in drinking water at concentrations higher than the minimum reporting level (MRL) of 2 ng/L. Four nitrosamines including N-nitroso-diethylamine (NDEA), N-nitroso-di-n-butylamine (NDBA), N-nitroso-methylethylamine (NMEA) and N-nitroso-pyrrolidine (NPYR) and very low detections. N-nitroso-di-n-propylamine (NDPA) was not detected in the sample analyses. NDMA was primarily detected in public water systems using chloramines other than chlorine.

ABSTRACT In recent years, the total amount of air pollutant emissions in China was reduced year by year, but pollution is still very serious, especially in some big cities where the environmental pollution has worsened in the last 20 years. The "Law of the People's Republic of China on the Prevention and Control of Atmospheric Pollution" ( LPCAP) was established in 1987. With the development of industrialization and air pollution changes, it had been revised twice in 1995 and 2000.The third revision of the law began in 2009 which was included in the "Eleventh five-year National People's Congress Standing legislative plan" and the State Council's 2009 legislative program. At present, the third revision of the LPCAP is in progress and MEP has completed the manuscript of the revised draft of the law. The purpose of this study is to explore the current situation of China's air pollution, as well as history of LPCAP, analysis of amendments in atmospheric legislation and the achievements of the LPCAP. Combined with China current situation, the research exposed some urgent problems of the Chinese atmospheric legislation which are related to: fã The issues of the regional Total Emission Control (TEC) policy and division. fã The issues of allocation of pollutant emission allowances and trade policy fã The issues of improving the pollution emission permit system. fã The issues of the mobile source emissions management. fã The issues of fuel management. fã The issues of the guarantee measures of the implementation of the LPCAP. In addition, the study compares the LPCAP with the U.S. CAA to offer some solutions for the third revised law and tries to find a fundamental solution for the flaws of China's existing Atmospheric Pollution Prevention legal system to be more Operable. As a result, the gap in air quality in China and the developed countries of the world will be narrowed and China will be better positioned for sustainable development.

Nanotechnology is a scientific field that has recently expanded due to its applications in pharmaceutical and personal care products, industry and agriculture. As result of this unprecedented growth, nanoparticles (NPs) have become a significant environmental contaminant, with potential to impact various forms of life in environment. Metal nanoparticles (mNPs) exhibit unique properties such as increased chemical reactivity due to high specific surface area to volume ratios. Bacteria play a major role in many natural and engineered biogeochemical reactions in wastewater treatment plants and other environmental compartments. I have evaluated the laboratory isolates of E. coli, Bacillus, Alcaligenes, Pseudomonas; wastewater isolates of E. coli and Bacillus; and pathogenic isolate of E. coli for their response to 50 & 100 nm sized Cu nanoparticles (CuNPs). Bactericidal tests, scanning electron microscopy (SEM) analyses, and probable toxicity pathways assays were performed. The results indicate that under continuous mixing conditions, CuNPs are effective in inactivation of the selected bacterial isolates. In general, exposure to CuNPs resulted in 4 to >6 log reduction in bacterial population within 2 hours. Based on the GR, LDH and MTT assays, bacterial cells showed different toxicity elicitation pathways after exposure to CuNPs. Therefore, it can be concluded that the laboratory isolates are good candidates for predicting the behavior of environmental isolates exposed to CuNPs. Also, high inactivation values recorded in this study suggest that the presence of CuNPs in different environmental compartments may have an impact on pollutants attenuation and wastewater biological treatment processes. These results point towards the need for an in depth investigation of the impact of NPs on the biological processes; and long-term effect of high load of NPs on the stability of aquatic and terrestrial ecologies.

Homemade overpressure chemical devices, commonly known as bottle bombs, are a current topic in the news media. These homemade overpressure chemical devices are a variety of homemade chemical bombs which are constructed by youth for amusement, mischief, or misbehaviors. These bombs are made from common household chemicals. The media is frequently presenting stories about the dangers of these homemade overpressure chemical devices. The media reports that this trend is spurred by the use of YouTube and other social media. As a result of the amount of information about homemade overpressure chemical devices on YouTube and other social media, youths can quickly learn how to fabricate and use these devices. However, these youths, like many in the community, are unaware of the hazards or legal consequences associated with this activity. At this time, reliable information about this form of homemade chemical bombs is limited. Therefore, this research project will explore the culture, fabrication, legality, and risks associated with these homemade chemical bombs. Then, the research will determine if the construction of these devices is a national problem as suggested by the news media and first responder organizations with an annually increasing number incidents, property damage, and injuries. The Center for Disease Control's Morbidity and Mortality Weekly Report for the week of July 18, 2003 presented the last and only known scientific attempt to determine the impact of homemade overpressure chemical devices on society. However, the Center for Disease Control was not able to get an accurate determination of the trends associated with homemade overpressure chemical devices due to the limitations of the data it reviewed. This research project looks at the data available from national databases, municipal databases, and the first responders of nine cities to determine the impact that Homemade Overpressure Chemical Devices are having on these communities within the United States. The research concluded that the number of Homemade Overpressure Chemical Devices cannot be gathered from either a national database or municipal databases. Interviews with first responders indicate that all areas of the United States are experiencing some Homemade Overpressure Chemical Device activity. However, this activity usually remains low until spurred on in a fad-like pattern.