Photocurable poly(ethylene glycol) diacrylate resins with variable loadings of functionalized silica nanoparticles

131937-Thumbnail Image.png
Description
Photocurable nanocomposites have great potential within advanced manufacturing, multifunctional materials, and most specifically tissue engineering. The properties and characteristics of these nanocomposites can be tailored to mimic those of various tissues and/or cartilage, allowing the bio-inspired synthetic materials to replace

Photocurable nanocomposites have great potential within advanced manufacturing, multifunctional materials, and most specifically tissue engineering. The properties and characteristics of these nanocomposites can be tailored to mimic those of various tissues and/or cartilage, allowing the bio-inspired synthetic materials to replace them. This project investigates the effect of methacrylate-functionalized (MA-SiO2) and vinyl-functionalized (V-SiO2) silica nanoparticle loading content on the thermal, mechanical, physical, and morphological characteristics of PEG nanocomposites. It was discovered that both V-SiO2 and MA-SiO2 did not considerably impact the glass-transition temperature or hydrophilicity of the material. The gel fraction of composites containing V-SiO2 decreases with the initial addition of 3.8 wt%, but then displays an increase with further addition (>7.4 wt%) until it reaches a plateau at 10.7 wt%. Whereas, the MA-SiO2 induced no significant changes in gel fraction with increased loading. An increase in mechanical properties was also observed with increasing concentration for both sets of series. However, due to the higher crosslink density, MA-SiO2 reached its ultimate mechanical stress threshold at a lower concentration of 7.4 wt%, while V-SiO2 maxed out at 10.7 wt%. Scanning electron microscopy coupled with transmission electron microscopy revealed that V-SiO2 displayed a bimodal size distribution, while MA-SiO2 displayed only one.
Date Created
2020-05
Agent