Much of Nepal lacks access to clean drinking water, and many water sources are contaminated with arsenic at concentrations above both World Health Organization and local Nepalese guidelines. While many water treatment technologies exist, it is necessary to identify those that are easily implementable in developing areas. One simple treatment that has gained popularity is biochar—a porous, carbon-based substance produced through pyrolysis of biomass in an oxygen-free environment. Arizona State University’s Engineering Projects in Community Service (EPICS) has partnered with communities in Nepal in an attempt to increase biochar production in the area, as it has several valuable applications including water treatment. Biochar’s arsenic adsorption capability will be investigated in this project with the goal of using the biochar that Nepalese communities produce to remove water contaminants. It has been found in scientific literature that biochar is effective in removing heavy metal contaminants from water with the addition of iron through surface activation. Thus, the specific goal of this research was to compare the arsenic adsorption disparity between raw biochar and iron-impregnated biochar. It was hypothesized that after numerous bed volumes pass through a water treatment column, iron from the source water will accumulate on the surface of raw biochar, mimicking the intentionally iron-impregnated biochar and further increasing contaminant uptake. It is thus an additional goal of this project to compare biochar loaded with iron through an iron-spiked water column and biochar impregnated with iron through surface oxidation. For this investigation, the biochar was crushed and sieved to a size between 90 and 100 micrometers. Two samples were prepared: raw biochar and oxidized biochar. The oxidized biochar was impregnated with iron through surface oxidation with potassium permanganate and iron loading. Then, X-ray fluorescence was used to compare the composition of the oxidized biochar with its raw counterpart, indicating approximately 0.5% iron in the raw and 1% iron in the oxidized biochar. The biochar samples were then added to batches of arsenic-spiked water at iron to arsenic concentration ratios of 20 mg/L:1 mg/L and 50 mg/L:1 mg/L to determine adsorption efficiency. Inductively coupled plasma mass spectrometry (ICP-MS) analysis indicated an 86% removal of arsenic using a 50:1 ratio of iron to arsenic (1.25 g biochar required in 40 mL solution), and 75% removal with a 20:1 ratio (0.5 g biochar required in 40 mL solution). Additional samples were then inserted into a column process apparatus for further adsorption analysis. Again, ICP-MS analysis was performed and the results showed that while both raw and treated biochars were capable of adsorbing arsenic, they were exhausted after less than 70 bed volumes (234 mL), with raw biochar lasting 60 bed volumes (201 mL) and oxidized about 70 bed volumes (234 mL). Further research should be conducted to investigate more affordable and less laboratory-intensive processes to prepare biochar for water treatment.
In an effort to address the lack of literature in on-campus active travel, this study aims to investigate the following primary questions:<br/>• What are the modes that students use to travel on campus?<br/>• What are the motivations that underlie the mode choice of students on campus?<br/>My first stage of research involved a series of qualitative investigations. I held one-on-one virtual interviews with students in which I asked them questions about the mode they use and why they feel that their chosen mode works best for them. These interviews served two functions. First, they provided me with insight into the various motivations underlying student mode choice. Second, they provided me with an indication of what explanatory variables should be included in a model of mode choice on campus.<br/>The first half of the research project informed a quantitative survey that was released via the Honors Digest to attract student respondents. Data was gathered on travel behavior as well as relevant explanatory variables.<br/>My analysis involved developing a logit model to predict student mode choice on campus and presenting the model estimation in conjunction with a discussion of student travel motivations based on the qualitative interviews. I use this information to make a recommendation on how campus infrastructure could be modified to better support the needs of the student population.
In this project, I examined the relationship between lockdowns implemented by COVID-19 and the activity of animals in urban areas. I hypothesized that animals became more active in urban areas during COVID-19 quarantine than they were before and I wanted to see if my hypothesis could be researched through Twitter crowdsourcing. I began by collecting tweets using python code, but upon examining all data output from code-based searches, I concluded that it is quicker and more efficient to use the advanced search on Twitter website. Based on my research, I can neither confirm nor deny if the appearance of wild animals is due to the COVID-19 lockdowns. However, I was able to discover a correlational relationship between these two factors in some research cases. Although my findings are mixed with regard to my original hypothesis, the impact that this phenomenon had on society cannot be denied.
A journalistic, first-person narrative going through the lessons learned from travel. The story is complemented by a series of photos from childhood to the present all uploaded to a Wix-based website.
This project showcases the significance of allowing kids to be involved in the design process of a STEAM museum. By allowing kids to help prototype, it ultimately benefits the overall museum and allows for an additional learning experience for the kids.
September 11th, 2001 was a day that affected everyone. The world came to a stop. The aviation industry was affected, and the national airspace system was closed for a few days. The events that occurred on that specific day enacted changes that affect the industry to this day. This paper analyzes some of the changes that were made and discusses some of the changes the industry is going through again, about 20 years after the events on September 11th. The coronavirus pandemic has changed the way we all live our daily lives and aviation is not exempt. Changes to aircraft cleaning procedures, boarding processes, and seat design have all been ways the industry has gone through changes. The results of a potential recovery as well as the long-term changes are discussed.
In this Barrett Honors Thesis, I developed a model to quantify the complexity of Sankey diagrams, which are a type of visualization technique that shows flow between groups. To do this, I created a carefully controlled dataset of synthetic Sankey diagrams of varying sizes as study stimuli. Then, a pair of online crowdsourced user studies were conducted and analyzed. User performance for Sankey diagrams of varying size and features (number of groups, number of timesteps, and number of flow crossings) were algorithmically modeled as a formula to quantify the complexity of these diagrams. Model accuracy was measured based on the performance of users in the second crowdsourced study. The results of my experiment conclusively demonstrates that the algorithmic complexity formula I created closely models the visual complexity of the Sankey Diagrams in the dataset.
Blockchain technology has taken the world by storm, and is now establishing itself the the real estate industry. Through new inventions such as smart contracts and crypto mortgages, the real estate industry is at the precipice of a major technological shift. After careful analysis of the current technologies and interviews with industry experts, this thesis will conclude with the possible implications that will arise from the wide spread use of Blockchain technology in real estate.
Globally, the incidental capture of non-target species in fisheries (bycatch) has been linked to declines of ecologically, economically, and culturally important marine species. Gillnet fisheries have especially high bycatch due to their non-selective nature, necessitating the development of new bycatch reduction technologies (BRTs). Net illumination is an emerging BRT that has shown promise in reducing bycatch of marine megafauna, including sea turtles, cetaceans, and seabirds. However, little research has been conducted to understand the effects of net illumination on fish assemblages, including bony fish and elasmobranchs (i.e. sharks, rays, and skates). Here, I assessed a 7-year dataset of paired net illumination trials using four different types of light (green LEDs, green chemical glowsticks, ultraviolet (UV) lights, and orange lights) to examine the effects of net illumination on fish catch and bycatch in a gillnet fishery at Baja California Sur, Mexico. Analysis revealed no significant effect on bony fish target catch or bycatch for any light type. There was a significant decrease in elasmobranch bycatch using UV and orange lights, with orange lights showing the most promise for decreasing elasmobranch bycatch, resulting in a 50% reduction in bycatch rates. Analysis of the effects of net illumination on elasmobranch target catch was limited due to insufficient data. These results indicate that the illumination of gillnets may offer a practical solution for reducing fish bycatch while maintaining target catch. More research should be conducted to understand the effects of net illumination in different fisheries, how net illumination affects fisher profit and efficiency, and how net illumination affects fish behavior. Further optimization of net illumination is also necessary before the technology can be recommended on a broader scale.
People have known about mass biodiversity loss and the human actions that drive it for decades now, and yet we have largely failed levels to change our behavior to protect the environment. What’s failing to motivate people to change? Some conservation psychologists have partially blamed the negative way we communicate about environmental issues for paralyzing audiences into doing nothing because they feel helpless to change such a big problem. Instead, many psychologists have called for using positive emotions in communication to motivate an audience, but there’s still little research showing whether that’s a more effective approach or not. To study whether positive or negative emotions are really more motivational for inspiring change, I looked at how different emotions were used in the discourse about an emerging conservation technology called de-extinction as a case study. De-extinction claims to be both a tool for fighting biodiversity loss and for inspiring more positive and inspiring narratives in conservation. In this thesis, I examine those claims by exploring five emotions that the discourse around de-extinction elicits: fear, guilt, grief, awe and hope. I examined the motivating power of those emotions and what kind of actions de-extinction discourse motivates or fails to motivate through the way it uses those emotions. I found that de-extinction discourse erases negative emotions and boosts positive ones as many conservation psychologists recommend. However, de-extinction discourse accomplishes this in misleading ways: it minimizes the sense of importance of ongoing extinctions by framing extinction as a reversible phenomenon, and it overstates the ability of technology alone to combat the extinction crisis without requiring societal change. As a result, de-extinction discourse could risk making the public less motivated to take personal action to forward conservation goals. I conclude that positivity or negativity should not be the central concerns for motivating action, but rather efficacy and honesty.