Experimental study of cement stabilized fiber reinforced compressed earth blocks as an alternative building material

Concern and interest about the environment and ecologic systems have promoted the usage of earth as a construction material. Technology advancement has resulted in the evolution of adobe into compressed stabilized earth blocks (CSEB). CSEB’s are prepared by compressing the soil-stabilizer mixture at a particular stress. In order to accomplish the required strength, cement has been used in a regular basis as stabilizing agent. It is of interest to find means to reduce the cement used in their construction without affecting its dry strength and durability. In this study, natural fibers were used along with lower proportions of cement to stabilize soil with varying fine content. Blocks were compacted at 10MPa stress and prepared by using 7%, 5% and 3% cement along with fiber content ranging from 0.25% to 2%. The effect of fine content, cement and fibers on strength and durability of the CSEB blocks were studied. Different sand/fine fractions of a native Arizona soil were used to fabricate the blocks. Results indicate that the compressive strength reaches a maximum value for blocks with 30% fine content and inclusion of fibers up to 0.5% increased the dry compressive strength. The use of 0.25% fiber by weight and 5% cement content showed comparable dry compressive strength to that of the 7% cement blocks with no fibers. The dry strength of the blocks reached an optimal condition when the combination of materials was 30% fines, 5% cement and 0.5% fibers, which satisfied the strength requirement given by the ASTM C62 and ASTM C216 standards for construction material. The CSEB’s with 0.5% fiber had higher toughness. The durability was determined by subjecting the CSEBs to wetting and drying cycles. The blocks with 5% cement withstand the durability test as the dry strength was higher than that required for construction use.

The blocks were also submitted to heating and cooling cycles. After 12 cycles, the specimens showed a reduction in strength, which further increased as the number of cycles increased. Finally, the thermal resistivity of fiber reinforced CSEB was found to be higher than that for clay bricks.