The notable increase in biofuel usage by the road transportation sector in Brazil during recent years has significantly altered the vehicular fuel composition. Consequently, many uncertainties are currently found in particulate matter vehicular emission profiles. In an effort to better characterise the emitted particulate matter, measurements of aerosol physical and chemical properties were undertaken inside two tunnels located in the São Paulo Metropolitan Area (SPMA). The tunnels show very distinct fleet profiles: in the Jânio Quadros (JQ) tunnel, the vast majority of the circulating fleet are light duty vehicles (LDVs), fuelled on average with the same amount of ethanol as gasoline. In the Rodoanel (RA) tunnel, the particulate emission is dominated by heavy duty vehicles (HDVs) fuelled with diesel (5% biodiesel). In the JQ tunnel, PM2.5 concentration was on average 52 μg m-3, with the largest contribution of organic mass (OM, 42%), followed by elemental carbon (EC, 17%) and crustal elements (13%). Sulphate accounted for 7% of PM2.5 and the sum of other trace elements was 10%. In the RA tunnel, PM2.5 was on average 233 μg m-3, mostly composed of EC (52%) and OM (39%). Sulphate, crustal and the trace elements showed a minor contribution with 5%, 1%, and 1%, respectively. The average OC : EC ratio in the JQ tunnel was 1.59 ± 0.09, indicating an important contribution of EC despite the high ethanol fraction in the fuel composition. In the RA tunnel, the OC : EC ratio was 0.49 ± 0.12, consistent with previous measurements of diesel-fuelled HDVs. Besides bulk carbonaceous aerosol measurement, polycyclic aromatic hydrocarbons (PAHs) were quantified. The sum of the PAHs concentration was 56 ± 5 ng m-3 and 45 ± 9 ng m-3 in the RA and JQ tunnel, respectively. In the JQ tunnel, benzo(a)pyrene (BaP) ranged from 0.9 to 6.7 ng m-3 (0.02–0.1‰ of PM2.5)] whereas in the RA tunnel BaP ranged from 0.9 to 4.9 ng m-3 (0.004–0. 02‰ of PM2.5), indicating an important relative contribution of LDVs emission to atmospheric BaP.
Details
- Physical-Chemical Characterisation of the Particulate Matter Inside Two Road Tunnels in the São Paulo Metropolitan Area
- Brito, J. (Author)
- Rizzo, L. V. (Author)
- Herckes, Pierre (Author)
- Vasconcellos, P. C. (Author)
- Caumo, S. E. S. (Author)
- Fornaro, A. (Author)
- Ynoue, R. Y. (Author)
- Artaxo, P. (Author)
- Andrade, M. F. (Author)
- Department of Chemistry and Biochemistry (Contributor)
- Digital object identifier: 10.5194/acp-13-12199-2013
- Identifier TypeInternational standard serial numberIdentifier Value1680-7316
- Identifier TypeInternational standard serial numberIdentifier Value1680-7324
- This article and any associated published material is distributed under the Creative Commons Attribution 3.0 License. View the article as published at: http://www.atmos-chem-phys.net/13/12199/2013/
Citation and reuse
Cite this item
This is a suggested citation. Consult the appropriate style guide for specific citation guidelines.
Brito, J., Rizzo, L. V., Herckes, P., Vasconcellos, P. C., Caumo, S. E., Fornaro, A., . . . Andrade, M. F. (2013). Physical–chemical characterisation of the particulate matter inside two road tunnels in the São Paulo Metropolitan Area. Atmospheric Chemistry and Physics, 13(24), 12199-12213. doi:10.5194/acp-13-12199-2013